Unidirectional progressive safety gear

USG-25P




  • Safety gear acting in downward direction
  • Innovative and patented system: progressive braking power is generated by expanding the C-profiled safety gear main body, which is acting as a C-type spring
  • Lightweight design: no additional spring elements required
  • Comfortable floating suspension ensuring simple and accurate alignment in relation to guide rail
  • Easy adjustment for guide rail size and shape (movable safety gear blocks)
  • Whole load range split up into steps so that no additional adjustments needed within one load step
  • Standard fixing via separate housing below car frame
  • Integration in vertical/horizontal frame beams available on request
  • Wide range of options available as safety gear housing, synchronization linkage, governor rope fixing or safety switch
 

Technical features


Max. nominal speed
v = 2,00 m/s
Max. overspeed governor tripping speed
vmax= 2,63 m/s
Mass to be gripped (P+Q)
(P+Q) = 465 - 2600 kg
Max. allowed tripping force of the overspeed governor
1000N
Applicable width hof guide rail head
k= 8-16 mm
Min. width of guide running surface
n = 22 mm
Min. height of guide rail profile
h = 62 mm
Guide rail manufacturing condition
Drawn or machined
Surface condition of guide rail
Dry or Oiled
Approved according to
European Lift Directive  95/16/EC
Applicable standards
European Standard EN81

Subject to change without notice
 
 
Show toolbox
This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.