Electromechanical Safety Gear

GLSG-22U

WITTUR GLSG-22U is an innovative safety gear, compliant with requirements of EN 81-20/50:2014. Electro-mechanical activation offers very short reaction time and easy synchronization between installed units. Combined with a magnetic strip-based absolute positioning system including safe electronic actuation, it does not require a conventional overspeed governor and its tension weight: fewer components in the shaft and more space for the cabin.    




GLSG-22U is a progressive safety gear with mechanical and electrical components. Mechanical components are consisting of a combination of disk springs, braking elements and trigger mechanism with free movable roller.  
The safety gear is activated by a compression spring; the electrical components are used to keep the safety gear in initial position.
The brake force is adjusted and sealed in the factory.

 

Highlights


 
  • Uni-directional progressive type safety gear for lifts up to 2,0 m/s
  • Application range: maximum 1850 kg load on safety, machined guide rails 9-16 mm oiled and dry condition
  • No conventional overspeed governor system needed
  • Fail safe design concept
  • SIL3 safety release system required (IEC 61508 compliant)
  • Electronical synchronization of left and right safety gear (simultaneous gripping)
  • Very short reaction time of the magnet release system ensures highest safety (low tripping speed)
  • Low release force from gripped situation
  • Sufficient running clearance to avoid unintended gripping
  • Versatile installation: can be installed either in a separate housing or on the vertical beam of the car sling
  • Small overall dimensions
  • Maintenance free operation
  • Complete traceability of the production of main components from raw material to final product with coding system stamped to the parts to enhance safety standard
  • Compliant with requirements of EN 81-20/50:2014
  • EU type certified according to Lift Directive
  • 100% tested and checked at factory
 

Features


 
Guide rail condition mass to be gripped (P+O) Fmax max. nominal speed
v
max. tripping speed
vmax
 machined / dry 560 - 1850 kg   2 m/s   2,63 m/s
 machined / oiled 570 - 1570 kg
 
power supply magnet [V / A] 24 V DC / 3,5 W
width of guid rail head  k [mm] 9 / 10 / 15,88 / 16 mm 
min. width of guide rail running surface n [mm] 25
min. height of guide rail profil  h [mm] 62 
temperature during operation [°C] -10 . +50°C 
storage temperature [°C] -25 . 10°C
max. air humidity   90% / +25°C
93% / +40°C
protection class   iP 2X
 
 
Show toolbox
This site uses cookies. By continuing to browse the site, you are agreeing to our use of cookies.