Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
Since 1977 Wittur has been providing the lift industry with versatile and high-quality doors. More than 30 years later Wittur is the leading company in the lift doors segment, with state-of-the-art technical solutions and unparalleled product range. Regardless of whatever your lift requires - a round door with panoramic panels rather than a straight or a folding one - Wittur can supply the best solution for your needs.
Onderzoek naar vernieuwende oplossingen en een strenge controle op kwaliteit zijn de hoofd kenmerken van de Wittur veiligheden, Wittur snelheidsbegrenzers kunnen worden toegepast bij een groot bereik van hefvermogens en snelheden.Ze kunnen toegepast worden bij zowel machinekamerloze liften als bij de normale liften. Onze snelheidsbegrenzer kan op elk willekeurig punt langs de omtrek van de schijf worden aangesproken. Door gelimiteerde slijtage aan de schijf kan een lange levensduur worden gegarandeerd.
Wittur offers a wide range of car and counterweight frames. Modularly conceived, these components are very flexible in terms of rated load, height and width. The wide range of accessories includes safety gears, suspension pulleys, compensation chain and travelling cable hangers, allowing configurations suitable for different shaft layouts, lift designs and rated speeds. Wittur can also supply special frames for tailored projects.
Onderzoek naar vernieuwende oplossingen en een strenge controle op kwaliteit zijn de hoofd kenmerken van de Wittur veiligheden,
According to EN81-1/2 A3 and EN81-21 A1 (new lifts in existing buildings), new lifts installed after January 1st 2012 must be equipped with a system to prevent a car moving away from the floor with the landing door not in the locked position and the car door not in the closed position.
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors..jpg)
Since 1977 Wittur supplies the lift industry with versatile and high-quality doors.
July 8th-10th, Paris
Wittur at Elevcon 2014
The 20th International Congress on Vertical Transportation Technologies, probably one of the most significant gatherings in the elevator professional calendar, was held in Paris at Novotel Eiffel from 8th to 10th July, 2014. The congress, organized by IAEE, the International Association of Elevator Engineers, was sponsored by Otis and was attended by 165 participants from 26 countries and was headed by Mr. Ami Lustig from Israel. A remarkable program of 38 presentations by leading experts from all over the world within the vertical transportation industry focused on some important topics including:
- Energy efficiency requirements for elevators worldwide
- Traffic calculation and simulation
- High rise solutions
- Evacuation in case of fire
- Norms and directives
Wittur Group was present with Thomas Lernet and Wolfgang Adldinger. In the context of the poster session Mr. Lernet presented the “Evolution of Elevator Doors for EN 81-20/50 Compliance”. Focus of the presentation was the newly introduced HYDRA EVO, the evolution of Hydra door, which is one of the first elevator products introduced on the market that is already compliant with EN81-20/50.
LEES MEER
August 12th-13th, São Paulo, Brazil
Safety in Motion: Wittur op Expo Elevador 2014 in São Paulo, Brazilië
Wittur zal aanwezig zijn op de EXPO ELEVADOR 2014 tentoonstelling, gepland voor 12 en 13 augustus in Centro de Exposições Imigrantes in São Paulo, te Brazilië.
Bezoekers van Wittur stand (nr A02.) zullen een aantal belangrijke onderdelen van het groot aantal Wittur oplossingentete zien krijgen, waaronder:
• Wittur MRL W-Line machinekamerloze lift pakket
• Wittur L375 kooiframe (hydraulische) pakket
• Wittur CITY ELECTRIC lift pakket
• Augusta EVO, de Wittur kwaliteit deur voor de residentiële lift markt, ontworpen om te voldoen aan EN81-20 / 50 normen
• Hydra EVO, de evolutie van Wittur Hydra, het liftdeur systeem ontworpen om flexibel te zijn. Het ontwerp van de EVO versie is al compatibel met EN81-20 / 50 normen en staat het gebruik van schroefmachines voor snelle montage toe.
• WSG09.2, de "pannenkoek" gearless machine van Wittur
• WSG S3.1 en S2.3 WSG, de compacte gearless machine voor MRL-toepassingen van Wittur
• Een selectie van de veiligheids onderdelen uit het brede scala van Wittur veiligheidsvoorzieningen
Onder het motto "Safety in Motion" zal Wittur beschikbaar zijn om u de nieuwste trends in de wereldwijde lift wereld en hoe Wittur oplossingen de groei van uw bedrijf ten goede komen presenteren.
Wittur Ltda, gevestigd in Londrina, zal hun uitbreiding project toelichten, dat de productiecapaciteit in de loop van 2015 zal verdubbelen. Vertegenwoordigers van alle Wittur bedrijven in Zuid-Amerika zullen ook beschikbaar zijn op de Wittur Stand, met inbegrip van Wittur Argentinië en Wittur Colombia.
We zullen blij zijn u te ontmoeten op Wittur stand (A02) op de Expo Elevador 2014!
Bezoekers van Wittur stand (nr A02.) zullen een aantal belangrijke onderdelen van het groot aantal Wittur oplossingentete zien krijgen, waaronder:
• Wittur MRL W-Line machinekamerloze lift pakket
• Wittur L375 kooiframe (hydraulische) pakket
• Wittur CITY ELECTRIC lift pakket
• Augusta EVO, de Wittur kwaliteit deur voor de residentiële lift markt, ontworpen om te voldoen aan EN81-20 / 50 normen
• Hydra EVO, de evolutie van Wittur Hydra, het liftdeur systeem ontworpen om flexibel te zijn. Het ontwerp van de EVO versie is al compatibel met EN81-20 / 50 normen en staat het gebruik van schroefmachines voor snelle montage toe.
• WSG09.2, de "pannenkoek" gearless machine van Wittur
• WSG S3.1 en S2.3 WSG, de compacte gearless machine voor MRL-toepassingen van Wittur
• Een selectie van de veiligheids onderdelen uit het brede scala van Wittur veiligheidsvoorzieningen
Onder het motto "Safety in Motion" zal Wittur beschikbaar zijn om u de nieuwste trends in de wereldwijde lift wereld en hoe Wittur oplossingen de groei van uw bedrijf ten goede komen presenteren.
Wittur Ltda, gevestigd in Londrina, zal hun uitbreiding project toelichten, dat de productiecapaciteit in de loop van 2015 zal verdubbelen. Vertegenwoordigers van alle Wittur bedrijven in Zuid-Amerika zullen ook beschikbaar zijn op de Wittur Stand, met inbegrip van Wittur Argentinië en Wittur Colombia.
We zullen blij zijn u te ontmoeten op Wittur stand (A02) op de Expo Elevador 2014!
LEES MEER
Tel Aviv, February 12th, 2014
Second Conference on Standardization and Lifts Engineering
The Second conference on Standardization and Lifts Engineering was held on February 12th, 2014 at the City Tower Events Centre, Raman Gan, Tel Aviv, Israel.
The conference was organized by The Standards Institutions of Israel; lectures were given by experts from all over the world.
Mr. Wolfgang Adldinger from Wittur gave a presentation about “Equipment and compliance of Elevators to Amendment 3”, which illustrated the UCM concept and the various technical solutions to achieve an even higher level of safety in every elevator installation.
UCM (Unintended Car Movement) is defined as a non-commanded car movement with open doors away from the landing position in up/down direction: the cause of some accidents in elevator installations.
EN 81-1/2+A3 standard, published in December 2009 and mandatory since 01.01.2012, introduces new safety devices in new elevator installations to detect a car movement while the elevator is on a floor with open doors. In case of movement, the UCM device activates a safety brake to stop the car and keep it stopped. Installations of UCM solutions with components from different suppliers are subject to certification for each single installation, while certified packages are tested beforehand and guarantee safety without the need to certify each installation.
WITTUR was the first company to supply a certified UCM package with Wittur components in May 2011.
An audience of over 300 people attended this conference, including professionals from the elevator industry, as well as inspectors, construction companies, lifts consulting companies, public institutions and government officials.
LEES MEER
Have a look!
Live streaming from Wittur stand at Interlift 2013
Live streaming from Wittur stand at Interlift 2013
LEES MEER
Hall 7, stand 7136
Ervaar Wittur op de Interlift 2013
Come to Augsburg Exhibition Centre from Oct. 15th to 18th in Hall 7, stand 7136 and experience Wittur at Interlift 2013!
Wittur will display its wide range of solutions for new installations and modernization as well as a preview of new products that are going to be announced soon. Moreover, a selection of new concepts and new technology from its Research and Development centers will demonstrate Wittur strategy of continuous product development.
Wittur will display its wide range of solutions for new installations and modernization as well as a preview of new products that are going to be announced soon. Moreover, a selection of new concepts and new technology from its Research and Development centers will demonstrate Wittur strategy of continuous product development.
LEES MEER
Colorno (Pr), Italy, May 31st 2013
Workshop "Enhancing lift aesthetics in architectural projects"
On May 31st 2013, Wittur held at its plant based in Colorno (Parma, Italy) a Workshop to present the lift integration in architectural designs with hi-aesthetical effect.
Thanks to its long –time experience, Wittur realizes custom-made projects with lift components completely integrated in high-value buildings; Wittur satisfies the functional and aesthetical needs required nowadays by designers and architects, always complying the current regulations.
During the workshop, a huge range of special solutions with hi-aesthetical effect has been presented (full glass and glass framed panels, round panoramic panels…) together with an overview of the most amazing Wittur installations made so far; moreover, it has been organized a visit to the plant to be aware of the quality of the Wittur production system.
Great participation and success for the workshop that it is included in an initiative with more future events aimed at enhancing and increasing Wittur solutions knowledge and application field.
Thanks to its long –time experience, Wittur realizes custom-made projects with lift components completely integrated in high-value buildings; Wittur satisfies the functional and aesthetical needs required nowadays by designers and architects, always complying the current regulations.
During the workshop, a huge range of special solutions with hi-aesthetical effect has been presented (full glass and glass framed panels, round panoramic panels…) together with an overview of the most amazing Wittur installations made so far; moreover, it has been organized a visit to the plant to be aware of the quality of the Wittur production system.
Great participation and success for the workshop that it is included in an initiative with more future events aimed at enhancing and increasing Wittur solutions knowledge and application field.
LEES MEER
Moskou, 06-08 juni, 2013
Wittur op de Lift Expo 2013
Wittur zal aanwezig zijn op Lift Expo Moskou 2013, de 6e editie van de belangrijkste lift beurs voor de Russische markt, die staat gepland van 6 juni - 8 juni.
Bezoekers kunnen Wittur vinden op Stand C1, zal Hal A, Pavillion 75. Hier kunnen ze verwachten:
1. Wittur’s nieuwe modulaire MCS1 liftkooi met verschillende afwerkingen;
2. Wittur’s Hydra liftdeur in de GOST EI 90 Russische brand certificering executie;
3. Wittur’s Hydra liftdeur met glazen panorama panelen;
4. MDS1 modulaire liftdeur in GOST E30 uitvoering in RAL en RVS afwerking;
5. Wittur’s Panoramische liftkooi, 1.000 kg.
6. Wittur’s MRL W Line compleet lift pakket, 630 kg in een panoramische versie;
7. Een reeks Wittur Gearless aandrijvingen waaronder WSG 29, WSG 25, WSG S3, S2 WSG, WSG S1.
U bent van harte welkom om medewerkers van Wittur te ontmoeten op Lift Expo Moskou 2013!
Bezoekers kunnen Wittur vinden op Stand C1, zal Hal A, Pavillion 75. Hier kunnen ze verwachten:
1. Wittur’s nieuwe modulaire MCS1 liftkooi met verschillende afwerkingen;
2. Wittur’s Hydra liftdeur in de GOST EI 90 Russische brand certificering executie;
3. Wittur’s Hydra liftdeur met glazen panorama panelen;
4. MDS1 modulaire liftdeur in GOST E30 uitvoering in RAL en RVS afwerking;
5. Wittur’s Panoramische liftkooi, 1.000 kg.
6. Wittur’s MRL W Line compleet lift pakket, 630 kg in een panoramische versie;
7. Een reeks Wittur Gearless aandrijvingen waaronder WSG 29, WSG 25, WSG S3, S2 WSG, WSG S1.
U bent van harte welkom om medewerkers van Wittur te ontmoeten op Lift Expo Moskou 2013!
LEES MEER
May 22-23th - ExCeL Exhibition Centre - London
Meet Wittur at Liftex 2013
We are happy to thank all our customers who attended Liftex 2013, the international event for the Lift and Escalator industry.
Wittur Ltd welcomed them at its stand B30 at the ExCeL Exhibition Centre in London from May 22th to May 23th, 2013.
We received an outstanding feedback about the wittur products on display, including:
- MRL W-line lift package
- MDS1 modular door system
- UCM unintended car movement protection package
- S2&S3 gearless machines
Wittur Limited remains at your disposal for any further inquiries from its office in Mold!
Wittur Ltd welcomed them at its stand B30 at the ExCeL Exhibition Centre in London from May 22th to May 23th, 2013.
We received an outstanding feedback about the wittur products on display, including:
- MRL W-line lift package
- MDS1 modular door system
- UCM unintended car movement protection package
- S2&S3 gearless machines
Wittur Limited remains at your disposal for any further inquiries from its office in Mold!
LEES MEER
Bratislava, Slovakia
Wittur International Management Meeting 2013
Wittur Management team gathered in Bratislava, Slovakia on April 25th-26th for the IMM - Wittur International Management team.
The team of the local slovakian Wittur production facility welcomed the international guest coming from wittur locations worldwide.
A significant number of persons were participating for the first time as the joined Wittur less then one year ago.
The conference presented Wittur strategy in production, purchasing, sales, marketing. Wittur Academy was also presented to the public. On the second Day, the well-know economist Graeme Maxton presented his views on the future trends of the economic situation. And During the official dinner the Wittur logo was projected next to the Castle of Bratislava, which became for one night a Wittur branded city!
The team of the local slovakian Wittur production facility welcomed the international guest coming from wittur locations worldwide.
A significant number of persons were participating for the first time as the joined Wittur less then one year ago.
The conference presented Wittur strategy in production, purchasing, sales, marketing. Wittur Academy was also presented to the public. On the second Day, the well-know economist Graeme Maxton presented his views on the future trends of the economic situation. And During the official dinner the Wittur logo was projected next to the Castle of Bratislava, which became for one night a Wittur branded city!
LEES MEER
April 4th-7th 2013,Tüyap Fair & Congress Center, İstanbul, Turkey
Wittur at Asansör İstanbul 2013
Wittur will be present at Asansör İstanbul 2013, the important lift exhibition scheduled from April 4th to April 7th 2013 at Tüyap Fair & Congress Center in İstanbul, Turkey.
Asansör 2013, held by İFO - İstanbul Fuar Hizmetleri with the support of AYSAD (Association of Elevator and Escalator Industrialists) will see the presence of 400 exhibitors from 37 countries; Wittur is located in Hall 7, Stand D10.
Visitors of Wittur stand will be able to experience the widest range of lift components and solutions, including:
- Wittur MRL W Line machine roomless lift package in EN81-71 Category II vandal resistant execution;
- Wittur MRL W line machine roomless lift package in panoramic execution;
- Wittur MCS1 modular lift car, exhibited in a variety of interior finishes;
- Wittur Osaka round panoramic lift car;
- Wittur MDS1 modular lift door presented in fire resistant EN 81-58 E120 and E30 GOST executions
- Wittur FINELINE reduced thickness lift door for modernization;
- Wittur HYDRA, probably the most successful lift door in the world, in fire-resistant EN81-58 E120 and GOST EI90, EI60 executions;
- A range of Wittur gearless drives including WSG S1, S2, S3 and WSG 08;
- Wittur frequency inverter series GLD;
- Wittur technology for energy efficieny
- Wittur range of Safety gears.
In the context of the Asansör Technical conference program, Wolfgang Adldinger from Wittur is scheduled to deliver a presentation On April 6th at 12:00 – 13:00 in his role of Chairman of Components Committee – ELA. The title of the presentation is “EN 81 + A3 PRACTICES IN GERMANY”.
You are welcome to join Wittur at Asansör 2013!
LEES MEER
Wittur groep
lift onderdelen
Copyright © Wittur 2017 - All rights reserved
Follow us on:
Wittur heeft haar privacybeleid geactualiseerd volgens de GDPR. Door verder te surfen op de site, gaat u akkoord met ons privacybeleid.