05/12/2018​

Wittur India is now ISO 45001:2018 certified



At the end of November 2018, Wittur plant in Chennai (India) has been audited and certified by TUV Rheinland according to ISO 45001:2018, the new international standard that verifies excellence and good practices in Occupational Health and Safety Management Systems.

Released in March, the new ISO standard puts special emphasis on prevention systems and on the companies' global commitment for the development of a culture of prevention and its continuous improvement. It bases its focus on prevention management as well as on the co-participation of workers and managers in guaranteeing safer and healthier working environments.

LEIA MAIS
Wiedenzhausen, November 23, 2019.

Wittur FINELINE reduced sill door now available with restrictor device



Wittur  announces  the  availability of Fineline door in a new execution with restrictor device for coupling with manual swing landing doors according to the requirements of EN81-20/50 (Paragraph 5.3.15.2).

The restrictor device only allows opening of  car  door when aligned with a landing door at each floor.
The new execution is available for 2-panel central opening and side opening and for 4-panel symmetrical and asymmetrical Fineline doors. Dimensions range from 600 to 900 mm clear opening.

LEIA MAIS
November 7, 2018

Grand Open house at Wittur France



On November 7, approximately 100 customers from all across France came to   Wittur’s   local  head office in Lisses, near Paris, for a grand open house.
 
For our French team and our product experts from all over   Wittur’s   world, this was the perfect occasion to present, in our new showroom, the whole range of Wittur solutions and latest product innovations, such as Hydra   eArm   modernization kit (for existing arm-driven Hydra operators), C-Mod car door featuring ECO+ drive and B-G door in vandal-resistant execution. Safety gears, over-speed governors, UCM solutions, gearless drives, cars, slings and modernization packages for existing elevators completed the wide variety of exhibits on display.

LEIA MAIS
31 de outubro de 2018

Porta C-MOD agora disponível com drive Wittur ECO +



A Wittur anuncia hoje a disponibilidade da porta de cabina C-MOD com drive Wittur ECO +  como opção.
A nova opção reúne a estrutura mecânica fiável e com economia de espaço da C-MOD e o drive Wittur mais vendido: uma nova oferta com vantagens tecnológicas distintas.

LEIA MAIS
October 25th, 2018

Wittur GmbH and LM Liftmaterial celebrate Wittur 50th anniversary with customers



On October 25, our colleagues from Wittur GmbH and LM  Liftmaterial celebrated in Wiedenzhausen, together with more than 80 customers from the DACH region (Germany, Austria and Switzerland), the 50th anniversary of the Wittur Group.

LEIA MAIS
24 de Outubro 2018

Wittur Tour 2018 em Portugal



No passado dia 24 de Outubro tivemos em Portugal o Wittur Tour 2018. 50 participantes, de 30 empresas estiveram presentes: estes são os impressionantes dados desta edição 2018.

Muito Obrigado a todos os assistentes que participaram no nosso evento de Sintra!

LEIA MAIS
October 18, 2018

Wittur Italy celebrated the 50 years anniversary of Wittur with customers



Wittur Italy celebrated the 50th anniversary of  wittur  along with its customers in  Colorno  on October 18
More than 100 customers found themselves at seat headquarters and enjoyed the welcoming atmosphere of our completely renewed showroom, which highlights the most recent evolution of the range of  Wittur components.

LEIA MAIS
September 27-28, 2018

Official Opening of the new Wittur Showroom in Almere



On September 27 and 28, Wittur B.V. premises in Almere (The Netherlands) hosted nearly 150 customers for a two-day Open House event dedicated to the official opening of our new showroom and to the presentation of the latest news in  Wittur’s  product portfolio.

LEIA MAIS
Atlantic City, September 24 - 27, 2018

Wittur at NAEC'S 69th Annual Convention & 2018 Exposition



The NAEC'S 69th Annual Convention & 2018 Exposition, the largest vertical transportation show in North America, is going to open its door to professionals of the elevator business on September 24 - 27, 2018 at the Sheraton & Atlantic City Convention Center in Atlantic City, NJ.

The exposition houses 200+ exhibits featuring the industry’s newest technology and products. Among them, Wittur will be present at booth # 1331 to showcase its range of complete entrances, adaptable door operators, space-efficient safety gears and speed control devices, low profile traction machines and modernization kits.

The US sales and after sales team at Tyler will be at your disposal to illustrate  Wittur’s  competence in  tailor made  designs, that are featured in some of the most iconic buildings in the US.

LEIA MAIS
18-19 September 2018

E2 Forum Frankfurt: Innovation Forum for Elevator and Escalator Technology



The E2 Forum Frankfurt provides the industry with a technological and content platform to create a dialogue between the elevator industry and the professionals of vertical transportation management in modern buildings. This technical conference celebrated its premiere on 18 and 19 September 2018 at Frankfurt Exhibition centre in Frankfurt am Main, Germany.

LEIA MAIS
Show toolbox
A Wittur atualizou sua política de privacidade de acordo com o GDPR. Ao continuar navegando pelo site, você concorda com nossa política de privacidade.